Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

voltage of 3.3v not achieved even though programmed

Hello, I am using altera cyclone 3 FPGA for one of my applications. I have programmed the output pins to be 3.3v LVCMOS output(from the PIN Planner). However when I check the output in the scop...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Hallo,

you could also check the *.pin file. Here you can verify that all informations from pin-planner are transferred right.

Of course only if VCCIO is 3,3V, like wolforth said already.

Greets