Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

VCCIO EPM7128SLC84-15 and 5 Volt outputs: HELP!

I'm using a MAX EPM7128SLC84-15 and need 5V logic outputs. So, the CPLD is wired with all VCC=5V and all the VCCIO = 5V too. Yet the outputs show 3.3V on the 'scope. I believed the Data Sheet page...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Unfortunately yes. The signals interface with 5V CMOS logic and some signals needed the extra energy to drive it.

Thanks again for your help - and the visit offer's genuine!