Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

using memory ram in cycloneII

Hi! What is the verilog code to tell the compiler to use the internal RAM chip? reg[7:0] ram[1024];
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

tnx!

is it correct?

module ram(clk,data,myaddr,myram);

input clk;

input[7:0] data;

input[9:0] myaddr;

output[7:0] myram;

reg[7:0] myram[1023:0];

always@(posedge clk)

myram[myaddr]<=data;

endmodule