Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Usermode

Can anyone please tell me the procedure for entering the usermode, in order to see the status of the CRC_ERROR pin in cycloneii EP2C35. Thank you in advance
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Thanks for the reply. I am using development kit Nios II cyclone II embedded development kit. I figured out my problem. I had not assigned I/O pins properly. Using Pin planner when I assigned my inputs and output to a proper pin number in FPGA Cyclone II (EP 2C35F672C6), the user program starts automatically after Jtag downloaded successful (It is shown in progress window in "Programmer"). :)