Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

User I/O conflict with DCLK (Cyclone 3)

I have custom board with EP3C5E144 used for educational purposes. Board contains EPCS16, SRAM and some other peripheral. I create NIOS system with program stored in EPCS (it was made in accorda...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

one good solution is set PIN11 "I/O Maximum Toggle Rate" to "0" by Assignment Editor.