Forum Discussion

ARG007's avatar
ARG007
Icon for New Contributor rankNew Contributor
1 year ago
Solved

USB BLASTER is showing in device manager but not getting detected in hardware setup of Quartus prime

The USB blaster is used in EPM240T100C5N CPLD board, but it is not getting detected in Quartus prime software.
Programmable Logic Device
  • NurAiman_M_Intel's avatar
    NurAiman_M_Intel
    1 year ago

    Sorry to tell you that we do not ensure the quality of clones devices. Hence we are unable to provide further service for this case.

    I now transition this thread to community support. f you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you.

    We apologize for the inconveniences.

    Regards,

    Aiman


NurAiman_M_Intel's avatar
NurAiman_M_Intel
Icon for Super Contributor rankSuper Contributor
1 year ago

Hi,


  • How many USB blaster has you tested and how many are working?
  • Does the broken USB blaster ever been detected before?
  • Have customer try to uninstall and reinstall the USB blaster driver?

Regards,

Aiman



ARG007's avatar
ARG007
Icon for New Contributor rankNew Contributor
1 year ago

1. I have tested one USB blaster, here is the following link.

https://www.flyrobo.in/usb-blaster-altera-cpld-fpga-programmer?tracking=ads&tracking=4a9a9a&gad_source=1&gclid=Cj0KCQiAst67BhCEARIsAKKdWOnS1Ic9tx34q9Gp_j0umB9ksllTyBn5EwmBuYc-piXsLOBYUqtIoxQaAj4IEALw_wcB

2. The USB blaster is getting detected in Device manager, I have given a proper path. But its not getting detected in hardware set up in Quartus Prime Lite 22.1 std edition.

3. I have tried many times to install and uninstall the driver, its getting detected with some of the driver but not showing up in Quartus prime, even I tried with the Quartus II programmer but its not getting detected.

Am I missing some small details to operate it with EPM240T100C5N CPLD?

Regards and Thanks

Arpan