Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Unused REFCLK and GXB Pins

The Cyclone IV GX Schematic Review Worksheet says to tie all unused REFCLKn pins to GND through a 10K resistor, and the unused REFCLKp pins to GND through a 10K resistor. The same goes for unused GX...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

I don't have a lot a space on my board and I am wondering if I can use only 2 x 10k resistors.

I would like to use use 1 resistor per bank (QL0, QL1) to connect all unused GXB_RXn, GXB_RXp together?

Is it possible ? Or each signal type needs it own resistor ?