Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Unable to establish link between PCS and PHY in SGMII mode

Hi, I was trying to use System Console for setting up Triple Speed Ethernet design in SGMII mode. I was able to successfully configure the MAC and PHY registers. After this i configured the PCS...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

I finally made it: In my first attemp i read out the ethernet configuration memory from the working nios project, but configuring the TSE with this data was also not working.

Now, I dumped exactly what data are written to what addresses at the tse configuration interface. Than I did exactly the same in my tse-only project, and now its working.