Unable to establish link between PCS and PHY in SGMII mode

Hi,

I have one more doubt.

How can i verify the MAC registers that i have set does not create any issues.

Here are the registers that i set and read out onto the console.

TSE MAC Rev = 0x00000a01

TSE MAC read Scratch = 0xaaaaaaaa

Command Config = 0x0100001b

MAC Address 0 = 0x22334450

MAC Address 1 = 0x0000ee11

Frame Length = 0x000005dc

Pause Quanta = 0x0000ffff

RX Section Empty = 0x00000000

RX Section Full = 0x00000000

TX Section Empty = 0x00000000

TX Section Full = 0x00000000

RX Almost Empty = 0x00000008

RX Almost Full = 0x0000000e

TX Almost Empty = 0x00000008

TX Almost Full = 0x00000003

MDIO Address 0 = 0x00000000

MDIO Address 1 = 0x00000000

Regiter Status = 0x00000000

TX IPG Length = 0x0000000c

TX Command Status = 0x00000000

RX Command Status = 0x00000000

Thanks in advance