Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

UART problems in Cyclone board

I've implemented a variable baud UART for my project into a custom Cyclone Ep1C board. The board has a 32-bit custom processor on it and the FPGA interfaces to the processor driving its address and d...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

Thx,

Yup, the voltages are all same...Anyways I solved the problem.. It was timing related..The timings were off my just a few microseconds.. Adjusted the baud module to get it right and its working..

Thx anyways!