Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Trouble with NIOS Reading Slave Across Clock Domain

I've set up a QSYS system that looks as follows in the attachment with a few custom components With my code running on the NIOS I get the interrupt 0 signal, but when I try to read the slave in...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

I ended up upgrading Quartus from 11.1 to 11.1 SP2 and after creating a new QSYS project the problem went away. Not sure what the initial problem was.