Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

[Target Connection]: No Nios II target connection paths were located. Check connecti

Hi folks. I am using the Altera Cyclone III dev kit, Quartus II 10.1 64-bit, Nios II EDS 10.1, on Windows 7, and have until yesterday been able to download the standard NiosII sof file provided by A...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

--- Quote Start ---

I have already resolved the problem - I unintentionally cancelled the Nios II processor after recording the *.sof file to the FPGA with Quartus programmer. Leave the pop-up window saying "Time ramaining..." open.

--- Quote End ---

I don't get what you have done to resolve this issue. I am not able to run a simple hello world program on my system. Could you please elaborate on this?

This is the link to my project, I am using DE2i150 board. (couldn't post the link here as I don't have 5 posts, let me know if you want it)

I am able to run hello world for a system with NIOS2, onchipmemory, Jtag UART, LEDs. But when I add PCIe with a DMA to a duar port onchip memory, things are not working out.

Please help!

Ujjwal