Forum Discussion

tony_yu's avatar
tony_yu
Icon for New Contributor rankNew Contributor
4 years ago

Stratix II EP2S90F1020 JTAG issue

Dear Intel Employee, I have a Stratix II EP2S90F1020 FPGA. I just want to verify the IDCODE and do the boundary scan before configuration. I wired all 8 bank VCCIO (3.3V), VCCPD (3.3V) and VCCINT ...
JohnT_Altera's avatar
JohnT_Altera
Icon for Regular Contributor rankRegular Contributor
4 years ago

Hi,


If the FPGA is power up correctly then we should be expecting that the nStatus is high.


Could you help to check if the power supply is correctly powered, nCE is low, and nConfig is high?