Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorSome problems about altera_pll on cyclone V device
Hello everyone, I just met a problem about altera_pll on my cyclone V board. There is a 5CEFA4F23C8 FPGA on my board and the FPGA is conneted to a crystal oscillator via a clock input pin. ...
Altera_ForumHonored Contributor
Honored ContributorThe PLL issue was solved and it was working as expected.
The chip was new to me and it is a custom board not an evaluation one. So I had a lot of things to test. But anyway, everything is good for me now. That RREF_TL caused me some hard time.
