Forum Discussion

Gauthier_Auvray's avatar
Gauthier_Auvray
Icon for New Contributor rankNew Contributor
2 years ago

sof2flash offset in EPCS mode

Hello, We would like to generate a .flash file from .sof file for EPCS device with an offset != 0x0. Apparently with the --epcs option the address in the .flash output file (srecord) is always set ...
Configuration
Programmable Logic Device
EBERLAZARE_I_Intel's avatar
EBERLAZARE_I_Intel
Icon for Regular Contributor rankRegular Contributor
2 years ago

Hi,


Is it a Cyclone III device? Which Quartus version are you using with that?


  • Gauthier_Auvray's avatar
    Gauthier_Auvray
    Icon for New Contributor rankNew Contributor
    2 years ago

    Hello,

    Yes it's a Cylone III device. We use Quartus 12.