Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Simulation problem with simple edge detector

I have a very simple edge detector and I'm confused as to why I get this very small blip (pulse) on my output when it detects an edge. I ran into this in a larger design so I simplified it down to a...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

other options include:

1) generate data on clocked process anf forget about specific after figures. Or

2) register your comb statement on the clk edge

I normally use option 1