Forum Discussion
Altera_Forum
Honored Contributor
12 years agoHi Dave - we're almost on the same page. If I went the 2-cards+cable route, it's because my master is on the PC, and I'm trying to not use the ARM on the SoC chip at all. The OneStopSystems site -says- you don't need any drivers for their cards, but you're right that the devil is in the details. Still - I don't see this as a first-choice path so enough said.
Agreed that if I DID boot Linux on the SoC on the dev. board the connection to the world would be Ethernet. Never thought anything different. :-) Looking at Rocketboards now. Thanks! /j