Forum Discussion

Yt_aem's avatar
Yt_aem
Icon for New Contributor rankNew Contributor
3 years ago

Signal Tap Start-up failure

Hi,

I am using Quartus Prime Pro 19.1 and device is Cyclone 10GX150.

Using SFL to program the device is successful over the JTAG (See attached SFL.png). But, when opening the Signal Tap, it keeps saying, "Program the device to continue" (See attached Signal_tap.png). I have checked all parts related to JTAG and they are all correctly installed, consistent with the schematic attached.

Is there anyone who can help? I am in tight timing of a project.

Very very appreciate for your helps.

23 Replies

Show More
  • RichardT_altera's avatar
    RichardT_altera
    Icon for Super Contributor rankSuper Contributor
    3 years ago

    I am happy to hear that it works now!

    This is my first time seeing this kind of behavior and I will take note on this. In case there is another similar issue in future.

    Since the issue has been resolved, I now transition this thread to community support. If you have a new question, Please login to ‘https://supporttickets.intel.com’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.


    Thank you.


    Best Regards,

    Richard Tan


    p/s: If any answer from the community or Intel Support are helpful, please feel free to give best answer or rate 4/5 survey.


    • Yt_aem's avatar
      Yt_aem
      Icon for New Contributor rankNew Contributor
      3 years ago

      Okay. Thank you.

      Will do.