Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

SFL Production System

I am using an EPC40 in AS mode with an EPCS16 flash device. Our design is complete and works as expected when programming directly to the AS device. Now for our production environment we are tr...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

After you upload an image with an SFL to the FPGA, you should do an "automatic detect" in Quartus programmer. You should then see a new component in the JTAG chain which is the EPCS flash. You can then use the Quartus programmer to upload your design in the flash.