Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorSetting VCC on MAX 10
An old VHDL design is being ported to a MAX 10 device (10M2DCU324C8G). It is to run in a 3.3V system. The Quartus Prime Lite compiled it and assigned pins but it configured all the pins to 2.5V (defa...
Altera_ForumHonored Contributor
Honored Contributor --- Quote Start --- An interesting note was that the similar screen in "assignments -> settings" was greyed out. --- Quote End --- Not just greyed out but also telling "Configurable trough pin assignments", which is exactly the point. This means either Assignment Editor, or Pin Planner.
