byisrael
New Contributor
New ContributorSame PCB for the two CY4 FPGAs EP4CGX150CF23C8N & EP4CGX30CF23C8N
In order to support one PCB the two CY4 FPGAs EP4CGX150CF23C8N & EP4CGX30CF23C8N,
Need to connect additional I/O pins of EP4CGX30CF23C8N (see below) to GND/VCCINT (1.2V)
I compile EP4CGX150CF23C8...
Hi Israel Ben-Yeda,
It is not mandatory. You can refer to the link below for more details about this issue.
When migrating devices that have overlapping I/O and power pins, how...
Regards,
Aqid Ayman
