Forum Discussion

byisrael's avatar
byisrael
Icon for New Contributor rankNew Contributor
3 years ago
Solved

Same PCB for the two CY4 FPGAs EP4CGX150CF23C8N & EP4CGX30CF23C8N

In order to support one PCB the two CY4 FPGAs EP4CGX150CF23C8N & EP4CGX30CF23C8N, Need to connect additional I/O pins of EP4CGX30CF23C8N (see below) to GND/VCCINT (1.2V) I compile EP4CGX150CF23C8...
FvM's avatar
FvM
Icon for Super Contributor rankSuper Contributor
3 years ago
Generally, supported device migration doesn't require jumper resistors or similar, GX30 IO pin should have no problems to connect to VCCINT.

Frank