Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

RS232 DE2 board

Hi all, I'm working on a summer project and am trying to use the RS232 connection to connect the DE2 altera board to a hyperterminal on the computer to allow display information from the board....
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

Hi

I hope you have the connections right.

i.e to say RX of DE2 -> TX of PC

TX of DE2 -> RX of PC

Secondly, Is your hyperterminal settings is

same as your design? i.e Baud rate,data bits,Stop bit,Parity etc?