Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Remote Update Cyclone III from EPCS

I am able to load in an Application configuration from a specified address in the EPCS, but after a certain time the device reconfigures itself with the Factory configuration (at address 0). I ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

One way to check is to get the processor running in application mode, then connect to the processor using the NIOS II debugger. Let the processor remain paused and see if the FPGA still gets reconfigured.

Jake