Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Remote Update Cyclone III from EPCS with NIOSII!!

I have created a combined hardware and software image for both the factory design and the application image and programmed them to the EPCS. However when I reconfiguration in NIOSII at the applicatio...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Have you created a custom bootloader to allow you to boot the application image? The default bootloader will not do this. You can program the FPGA with the correct fpga image but the default EPCS bootloader will always look at the factory software image.

Jake