Forum Discussion

EnthuMan's avatar
EnthuMan
Icon for New Contributor rankNew Contributor
7 years ago

Remote firmware update of MAX10 over a serial interface (like a serial boot loader)

We only have a serial interface to a MAX10 and need to have a technique of changing the MAX10 code over this interface. Please advise.
SLabe's avatar
SLabe
Icon for Occasional Contributor rankOccasional Contributor
6 years ago

Have you been able to locate the template for the slave side of the example? The download is for the master side. Tks,

YWoo0's avatar
YWoo0
Icon for New Contributor rankNew Contributor
6 years ago

Yes, I able to locate the template. But it seem like most of the BUP application have to done through the embedded NIOS.

  • SLabe's avatar
    SLabe
    Icon for Occasional Contributor rankOccasional Contributor
    6 years ago

    If you could post the link to the slave template, it’d be great. Thanks!

  • SLabe's avatar
    SLabe
    Icon for Occasional Contributor rankOccasional Contributor
    6 years ago

    I mean the I2C slave, not the UART...

  • YWoo0's avatar
    YWoo0
    Icon for New Contributor rankNew Contributor
    6 years ago

    Do u mean the design on the slave part??? Well, Im not able to get this part as well. It didnt attached to the files. We have to do design on our own.