Forum Discussion

Yassine-Ca's avatar
Yassine-Ca
Icon for New Contributor rankNew Contributor
1 year ago

Read from memory

Hello, I'm working on DE1-SoC Cyclone V FPGA. I have prgrammed the FPGA to store a static data to the onchip memory created on Platform Designer, this generated the definitio...
Configuration
Yassine-Ca's avatar
Yassine-Ca
Icon for New Contributor rankNew Contributor
1 year ago

Hello,

I tried many time using System console with the following commands:
%get_service_paths master
/devices/5CSE(BA5|MA5)|5CSTFD5D5|..@2#USB-1#DE-SoC/(link)/JTAG/alt_sld_fab_sldfabric.node_0/phy_0/jtag_master.master

% open_service master "/devices/5CSE(BA5|MA5)|5CSTFD5D5|..@2#USB-1#DE-SoC/(link)/JTAG/alt_sld_fab_sldfabric.node_0/phy_0/jtag_master.master"

% is_service_open master "/devices/5CSE(BA5|MA5)|5CSTFD5D5|..@2#USB-1#DE-SoC/(link)/JTAG/alt_sld_fab_sldfabric.node_0/phy_0/jtag_master.master"
1

% master_read_memory "/devices/5CSE(BA5|MA5)|5CSTFD5D5|..@2#USB-1#DE-SoC/(link)/JTAG/alt_sld_fab_sldfabric.node_0/phy_0/jtag_master.master" 0x00000000 8

When I writed the last comman system console displays the same issue even I try to follow the link instructions.

Regards.

Yassine-Ca's avatar
Yassine-Ca
Icon for New Contributor rankNew Contributor
1 year ago

Hi,

Thank you, I used Eclipse with NIOS II and it is working.

I need now to send the program into flash memory, In platform Designer I choose Generic QUAD SPI Controller II, but I don't know which configuration device type do I need to choose, I have DE1-SoC Cyclone V FPGA. The memory i'll use is 32 GB.

Regards.