Forum Discussion

Zak's avatar
Zak
Icon for New Contributor rankNew Contributor
5 years ago
Solved

Cyclone V - LVDS input on a bank with Vccpd=2.5V and Vccio=1.8V

Hello, I'd like to have a confirmation of what I found on the Cyclone V Device Handbook regarding mixed voltage standards on a single bank. In my design I have multiple I/Os @ 1.8V and LVDS input...
  • ShafiqY_Intel's avatar
    ShafiqY_Intel
    5 years ago

    Hi Zak,

    There is no issue to use mixed voltage standards on a single bank. As long as that particular I/O bank supported your I/O standard (Vccpd=2.5V and Vccio=1.8V)

    Regards,

    Matt

Zak's avatar
Zak
Icon for New Contributor rankNew Contributor
5 years ago

Hi Matt,

I know that there is no issue to use mixed voltage standards on a single bank. What I don't understand is if I can do it with LVDS inputs, since the Vccio requirements in Table 5-9 of the Device Handbook for LVDS inputs is not so clear.

For LVDS outputs the requirements are Vccpd=2.5V and Vccio=2.5V.

For LVDS inputs the requirements are Vccpd=2.5V and Vccio=? Is it not relevant since only Vccpd is used for input LVDS buffers?

Thank you

ShafiqY_Intel's avatar
ShafiqY_Intel
Icon for Frequent Contributor rankFrequent Contributor
5 years ago

Hi Zak,

For LVDS inputs the requirements is Vccio=Vccpd

For LVDS outputs the requirements is Vccio=2.5V

And for Cyclone V, the value for Vccpd is 2.5V

Regards,

Matt

Recent Discussions