Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

Question about boot NIOS from Micron N25Q flash

Hi all, I am using arrow cyclone v soc kit, with a Cyclone V 5csxf6d6f31c6 chip which has a hardcore ARM-A9 inside. but i am not using this arm core, i am just working with nios purely on fpga sid...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

So it seems like directly after the flash programming, without re-power up the system, the system can boot up correctly. However, when the power is off, and on again, the system can boot up.

Thanks again for your time reading the post, and possible suggestion~~