Forum Discussion

yong's avatar
yong
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

Quartus Programmer fails to auto detect device on Cyclone10 GX Dev kit

Hello, I am testing ASx4 configuration on Cyclone10 GX Dev kit. I use Quartus Programmer tool to download .jic file to flash. In Quartus: Tool -> Programmer GUI, when I click auto detect, it cannot...
yong's avatar
yong
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

Hi John,

I failed to program max10.pof. It keeps saying "unexpected error in JTAG server -- error code ##". The error code <##> might be different every time.

I am able to program max10.sof. However, after .sof programmed, the LEDs on the Dev board shows FPGA configuration failed (i.e., D13 (red) is on). I am not sure if it indicates MAX10 is not configured correctly or Cyclone10 GX is not configured correctly. Executing BoardTestSystem, it says "FPGA is not detected in the Jtag Chain".

Thanks!