Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Quartus 2 and .LVDS

I have an easy question for one of the experts. I am using Quartus 2 13.1 and trying to program a Terasic DE3. This is the board with the 4 HSTC connectors, connected to the pads that support LVD...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Hi. Sorry for the delay.

The pins that allow "Differential" termination are on I/O Bank 1A, but the pins that do not are on I/O Banks 8B and 8C.

Thanks again!