Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

pulse generation with de0 nano

hi, there, i just received the nano board for my lab work. this is my first time touching this fancy board. what i wanna is a output 500ms pulse whose duty cycle is 1/60 (30s per cycle). i am t...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

You could always take the empirical approach; put a software delay (loop) in for the low and high time of the pulse, probe the pin with a scope, and then adjust the loop times accordingly.

Cheers,

Dave