Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

PTP 1588 on Cyclone V

Hi

I would like to implement PTP 1588 on my cyclone V EVAL kit DK-DEV-5CEA7N.

My problem is, I don't find any example how to connect all the ports of the TSE-MAC in the QSYS...

Does anyone have some advice how to start de development of ma project?

With the example board update portal I was able to communicate over the simple socket server via telnet to my FPGA. This

could be a good starting point for my project. But as I mentioned I don't know how to connect the PTP 1588 TSE in QSYS...

11 Replies

Show More
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    9 years ago

    Hi,

    I have the same problem on my cyclone V GX FPGA dev. kit.

    Im sending UDP/PTP sync message (with UDP stack on niosII) but TSE Mac does not put timestamp in PTP packet. (wireshark packet pic. attached). I think my problem is with hardware design (.qsys attached).

    Altera documentation for PTP on cyclone V is deficient..