Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

Programming recommendation for MAX II CPLD in a production test environment

During prototype development I used Quartus II with a ByteBlasterMV to program a single EPM570 on the PCB. Now the project is moving to production and I require a way to program in a production test...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

Hello,

I suggest that you take a look at this link: http://www.altera.com/support/devices/programming/max2/prg-max2.html

Also, the Quartus II 7.1 Handbook (see http://www.altera.com/literature/hb/qts/quartusii_handbook.pdf) provides detailed information about scripting. For example, Page 751 shows that a binary called quartus_pgm is available & allows to program/configure CPLD/FPGA use command lines. Pages 2156-2157 provide additional details on this topic.

I hope this helps.

--jmv