Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorProgramming NIOS II code to EPCQ in Quartus 13.1
Hello I'm having trouble with NIOS II code executing from an EPCQ x4 flash chip (p/n Micron N25Q256A) after a power cycle. I've followed the following guideleins to boot from EPCQ or EPCS (fro...
Altera_ForumHonored Contributor
Honored ContributorHi Burenkov,
this example is belonging to a previous post from an other user (Lanz). Look at his attachment. It is a code detail from the epcs flash controller driver located in c:\altera\13.1\ip\altera\sopc_builder_ip\altera_avalon_epcs_flash_controller\HAL\src and shows which EPCQ decvice is found on my hardware during init. Best regards Jens
