Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Programming mistake

Hi, I compiled a project for 5M80ZT100 (100 pin MAX V) in Quartus Prime and loaded it accidentally to 5M80ZE64C5N (64 pin MAX V). After that, I can't reconnect to 5M80ZE64C5N again with my US...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

I solved it. Unused pins were connected to GND by Quartus Prime which caused problem on my board.