Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

programming DE1 kit using Quartus 2

Hey guys I was recently given an Altera DE1 kit.This is my first time using an FPGA kit.The kit included the Quartus 2 v6.0 web edition software. After i have successfully installed the software,I...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Did you find and install the drivers? You don't need the subscription edition to program the DE1

When you program your device. you should have the USB blaster selected, in JTAG mode and then go to file -> open -> the .sof .pof file. click on them, check the program/configure box and hit start and it should work