Forum Discussion
Altera_Forum
Honored Contributor
Honored Contributorprogramming Cyclone III
I was wondering if a simulation model excised for the Cyclone III device being programmed via passive serial. I am using the Cyclone III and using the MAX II device to auto program the FPGA from flas...
Altera_ForumHonored Contributor
Honored ContributorI've never seen one. We've typically used a CPU or MPU when using pasive serial mode, so we tended to just played with it, until we got it to work.
One gotcha in some of the families is the 2 extra DCLKS clocks required from CONFIG_DONE to USER Mode start. So that's where several people get stuck. Pete
