Programming an FPGA Development Board with DPC++ using the oneAPI Base Toolkit on Windows

Hi @JavadImani,

Thank you for posting in Intel community forum and hope all is well and your interest in Intel oneAPI.

Short answer for your question would be yes, there are a build flow called IP Authoring which allow programming an FPGA board. More details on the flow can be found in the links belows:

- https://www.intel.com/content/www/us/en/docs/oneapi/programming-guide/2023-0/fpga-ip-authoring-flow.html

- https://www.intel.com/content/www/us/en/docs/programmable/749869/22-4/getting-started-with-oneapi-ip-authoring-18311.html

Note: there are also a getting started guide which would be a great place to start.

Best Wishes

BB

Hi @JavadImani,

Greetings, just checking in to see if there is any further doubts in regards to this matter.

Hope your doubts have been clarified.

Best Wishes

BB

Hi @JavadImani,

Greetings, as we do not receive any further clarification/updates on the matter, hence would assume challenge are overcome. Please login to ‘https://supporttickets.intel.com’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. For new queries, please feel free to open a new thread and we will be right with you. Pleasure having you here.

Best Wishes

BB