Forum Discussion

JavadImani's avatar
JavadImani
Icon for New Contributor rankNew Contributor
2 years ago

Programming an FPGA Development Board with DPC++ using the oneAPI Base Toolkit on Windows

Hello friends, I'm new to oneAPI and I wanted to know if it is possible to program an FPGA Development Board with the Intel oneAPI Toolkit (including using the Visual Studio Compiler)?
Configuration
BoonBengT_Altera's avatar
BoonBengT_Altera
Icon for Moderator rankModerator
2 years ago

Hi @JavadImani,


Thank you for posting in Intel community forum and hope all is well and your interest in Intel oneAPI.

Short answer for your question would be yes, there are a build flow called IP Authoring which allow programming an FPGA board. More details on the flow can be found in the links belows:

- https://www.intel.com/content/www/us/en/docs/oneapi/programming-guide/2023-0/fpga-ip-authoring-flow.html

- https://www.intel.com/content/www/us/en/docs/programmable/749869/22-4/getting-started-with-oneapi-ip-authoring-18311.html


Note: there are also a getting started guide which would be a great place to start.


Best Wishes

BB