Forum Discussion

New Contributor

4 years ago

Programming a MAX 10 from a MCU using JTAG

Hello! I'm trying to find documentation about how to program a MAX10 using JTAG. There is apparently a JRunner software, but after checking a bit more, it looks like MAX10 cannot be programmed ...

MBenca

Occasional Contributor

4 years ago

Hello Pastel,
the following web page and documents can be helpful:
- https://www.intel.com/content/www/us/en/programmable/support/support-resources/download/programming/jam.html
- https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/max-10/ug_m10_config.pdf
- https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/an/an425.pdf

Regards,
Martin

Forum Discussion

Programming a MAX 10 from a MCU using JTAG

Recent Discussions

Can you Validate MAX10 Date and Lot Code?

HDMI example design errors with Agilex 7

MAX10 RSU upgrade succeeds, but device boots Factory image instead of Application

Vcm for the clock input pins of agilex5 E-series FPGA A5ED065BB32AE5SR0

carry chain tdc