Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Programming a custom board without flash memory

I have a custom board (Stratix-II with an EP2S90F1020C3). Right now the functionallity is only described in HDL and it's working fine. However, the board does NOT have any flash memory. Now I w...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

You have to create a onchip memory and then in cpu reset address give this memory. and also enable "in system editor" for onchip in sopc so that after compilation you can download your code to this onchip.

Hope this solves your problem