Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

Programming a 7000S CPLD and getting 'Device Revision not supported'

Hi, Im trying to download to a EPM7064SLC10-N using a usb blaster and V13.0.1 (SP1) programming software. The error I get is : Info (209006): Device# 1 Silicon ID is ALTERA97(0C) Info (20900...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

hi,

Like I said in my original post I am using 13.0 sp1 and in a later post I have tried using version 11

Does anyone actually know what the error means?

Thanks
mbetten's avatar
mbetten
Icon for New Contributor rankNew Contributor
4 years ago

Hey everyone,

I have the same Issue. I would like to program EPM7128STI100-10n with Quartus II 13.0 sp1.

For some CPLD's the programmer shows the following message:

Device# 1 Silicon ID is ALTERA17(00)

Device revision is not supported

Operation failed

Does anyone have an idea for a workaround of this issue?

Best regards

Max