Forum Discussion

risic2024's avatar
risic2024
Icon for New Contributor rankNew Contributor
1 year ago

program successfully but output always high

hi, I am confused by EPM240T100C5,have tried many ways, but still failed, please give me some advices, thanks. It indicated the programming is successful, but output always stay high. even only as...
Programmable Logic Device
NurAiman_M_Intel's avatar
NurAiman_M_Intel
Icon for Super Contributor rankSuper Contributor
1 year ago

We sincerely apologize for the inconvenience caused by the delay in addressing your Forum queries. Due to an unexpected back-end issue in our system, your Forum cases, along with others, did not get through as intended. As a result, we have a backlog of cases that we are currently working through one by one.

Please be assured that we are doing everything we can to resolve this issue as quickly as possible. However, this process will take some time, and we kindly ask for your patience and understanding during this period. The cases will be attended by AE shortly.

We appreciate your patience and understanding, and we are committed to providing you with the best support possible.


Thank you for your understanding.


  • risic2024's avatar
    risic2024
    Icon for New Contributor rankNew Contributor
    1 year ago

    hi, glad to get your feedback. per FvM, I update a testing result with TopJTAG, hopefully it will help locate the cause.

    It blocks me almost one month, I tried many many ways, even decrese the soldering tempreture. please help push. any clue or suggestion is welcome. thanks !