Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

program EPCS flash

Hi everyone, I am trying to configure an EPCS4 device on a BeMicro board (cyclone 3 FPGA). Thus I have added a EPCS flash controller in the SOPC builder and configured the pins DCLK, nCEO, Data...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Did you first configure the FPGA by JTAG with the SOF file with the Quartus programmer?

Could you copy the text of the error into the forum and perhaps check what error 8 means?

At this moment I've a bemicro board connected to my system, and I do not have any problems to flash the device (EPCS16).