Forum Discussion

Sergey81's avatar
Sergey81
Icon for New Contributor rankNew Contributor
4 years ago

Problems with configuring CycloneIV from EPCQ32A

After changing EPCS16 (soic 😎 to EPCQ32A on PCB Cyclone IV FPGA can't load configuration data at power ups (Active Serial x1 is used). Quartus project is recompiled, configuration device in Device a...
NurAiman_M_Intel's avatar
NurAiman_M_Intel
Icon for Super Contributor rankSuper Contributor
4 years ago

Hi,


  • Sorry but we do not check device authenticity. However, if you got the devices from formal distributors, you shouldn’t worry on the device authenticity as the devices must be valid units. Otherwise, we do not ensure the device quality and do not provide the further service. You may find the authorized distributor list from the link below:

https://www.intel.com/content/www/us/en/programmable/buy.html


  • Have you follow the AN 822, the device migration guidelines for the migration?

https://www.intel.com/content/dam/support/us/en/programmable/kdb/pdfs/literature/an/an822.pdf



Regards,

Aiman






  • Sergey81's avatar
    Sergey81
    Icon for New Contributor rankNew Contributor
    4 years ago

    I read AN822, but it doesn't help...