--- Quote Start ---
This is my first post. I'm trying to get acquainted with Quartus 2 and my Altera FPGA board but I'm having problems starting.
--- Quote End ---
Welcome to the group and to FPGAs! Sorry you're having trouble ...
--- Quote Start ---
Firstly when I'm in Quartus I can't seem to find my device. I'm using a cyclone 3 EP3C16F484C6N and I do not see "cyclone 3" listed in the "family" pull down menu under the family & device settings nor do I see the EP3C16F484C6N listed in available devices.
--- Quote End ---
Altera (and Xilinx and Lattice) discontinue device support in their "latest version" of tools. When you download Quartus, you need to select the version based on the device you are interested in. The DE board is one of the University Program boards, and they have a good tool overview on their page;
http://www.altera.com/education/univ/software/unv-software.html "Quartus II software v13.0 SP1 supports all Altera University Program FPGA boards"
So basically you need to download 13.0sp1
--- Quote Start ---
Secondly, I don't know whether this is a big issue or not, but I can't seem to get my DE0_controlPanel to work
--- Quote End ---
This issue occurs because the Terasic Control Panel application is probably looking for a specific version of Quartus. You can probably read the documentation for your board to determine what version they recommend. Try and see if the panel works once you have downloaded 13.0sp1. Because the control panel is closed-source, you won't actually learn much from it. Once you get the software installed, decide on a project, and then come back to the forum for advice when you get stuck.
Cheers,
Dave
Honored Contributor
