Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Problem with Quartus and PIN plan (EP4CE6)

I am currently working with FPGA as part of a course at the university. At the university we use Terasic Altera Cyclone III EP3C16 Development & Education boards, I am quite familiar with it, I can f...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Thank you for your replies. The link ak6dn provided helped me a lot with finding the PIN assignments. However, there are more problems which I encountered now.

1. When I tried to test some scheme, I connected the board with USB blaster on the port JTAG (not AS), installed driver from C:/altera folder and tried to transfer my scheme but got "Failed".

https://preview.ibb.co/jC7i1d/problem.png

2. I am not sure how to use 4 SevenSegment displays which are available on the board since there are PIN assignments for only one of them.

https://image.ibb.co/iCZ5gd/7seg.png

https://preview.ibb.co/df0NSJ/segled.png

I see this option to select which display to use but how to use all of them at the same time?