Forum Discussion

VecFPGA's avatar
VecFPGA
Icon for New Contributor rankNew Contributor
1 year ago

Problem with JTAG_LOCK on MAX10 Development Kit: Unable to Program or Erase. CONF_DONE alway high.

Hi everyone, I’m also having problems with the lock/unlock instruction in the mentioned example. The issue is that after programming the FPGA (on the MAX10 Development Kit) with the design examp...
Configuration
FakhrulA_altera's avatar
FakhrulA_altera
Icon for Regular Contributor rankRegular Contributor
1 year ago

Hi VecFPGA,


We sincerely apologize for the inconvenience caused by the delay in addressing your Forum queries. Due to an unexpected back-end issue in our system, your Forum cases, along with others, did not get through as intended. As a result, we have a backlog of cases that we are currently working through one by one.


Please be assured that we are doing everything we can to resolve this issue as quickly as possible. However, this process will take some time, and we kindly ask for your patience and understanding during this period. The cases will be attended by AE shortly.


We appreciate your patience and understanding, and we are committed to providing you with the best support possible.


Thank you for your understanding.