problem using lcd16207

Question

hello all !!

After downloading the uClinux on the DE2 board , I see lcd16207 driver in /dev

Can anyone tell me how can I display something on the board...

I am very new , so if this sound stupid .. please excuse me !!!

Thnx !!!!

altera_forum · Answer

you should be able to use as any other character stream, with fopen(),fprintf() and so on...in the nioswiki there should be some examples http://www.nioswiki.com/operatingsystems/uclinux/lcd_16207

good luck

altera_forum · Answer

Thank you for reply... Do I need to connect RS232 cable to display on the board through uClinux ?

Forum Discussion